Dock Connectors
3/4″ X 3″ Stainless Connector Pin + Stainless Hitch Clip
3/4″ X 3″ Stainless Connector Pin with Hitch Clip
————————————————————–
Mates our DH SSTM or DH SSM with our DH SSF or DH SSTF.
1/2″ X 5″ Galvanized Carriage Bolt Set
1/2″ X 5 1/2″ Galvanized Hex Bolt Set
1/2″ X 4 1/2″ Galvanized Carriage Bolt Set
1/2″ X 3″ Galvanized Carriage Bolt Set
THIS IS THE MOST USED BOLT SIZE
Inside Corner 3″ Pipe Holder
The Pipe that is mounted on the plate has inside diameter of 3″ and an outside diameter of 3.5″.
Hardware
Inside Corner 2″ Pipe
The Pipe that is mounted on the plate has inside diameter of 2″ and an outside diameter of 2.5″.
4″ Galvanized Pipe Holder 0n 5″ X 6.75″ Backer Plate
4″ Galvanized Pipe Holder (0n 5″ X 6.75″ Backer Plate)
The Pipe that is mounted on the plate has inside diameter of 4″ and an outside diameter of 4.5″. Bolt holes are 9/16″ square to take 1/2″ Carriage Bolts.
3″ Pipe Holder On 5″ X 6.75″ Backer Plate
3″ Pipe Holder (0n 5″ X 6.75″ Backer Plate)
The Pipe that is mounted on the plate has inside diameter of 3″ and an outside diameter of 3.5″.
3″ Pipe Holder On 5″ X 5″ Backer Plate
3″ Pipe Holder (0n 5″ X 5″ Backer Plate)
The Pipe that is mounted on the plate has inside diameter of 3″ and an outside diameter of 3.5″.
2″ Pipe Holder 0n 5″ X 5″ Backer Plate
2″ Pipe Holder (0n 5″ X 5″ Backer Plate)
The Pipe that is mounted on the plate has inside diameter of 2″ and an outside diameter of 2.5″.
Dock Accessories
5 Step Lift Ladder
The lift ladder is an innovative, retractable ladder featuring a new and improved heavy-duty rung hanger (patent pending). To extend the life of the ladder, simply pull up the lower section above the water line to eliminate marine growth. The plastic coated lift cable will provide long lasting service.
Available in 5 steps only.