$15.95

1.5″ Pipe Adjustable Brace Assembly

1.5″ Pipe Adjustable Brace Assembly – Used for diagonal bracing between two dock legs.  Brace using 1/2″ pipe.


$17.50

1.5″ Pipe Adjustable Brace Split Assembly

1.5″ Pipe Adjustable Brace Assembly – Used for diagonal bracing between two dock legs.  Brace using 1/2″ pipe.  Split assembly allows for mounting after the dock is mounted.


Stationary Hardware

1.5″ Pipe Point

$22.00

1.5″ Pipe Point

1.5″ Pipe Point – Typically used with 1.5″ pipe.  Attaches to end of pipe to aid in the driving pipe deeper into mud or sand to aid in holding your dock in place.


Stationary Hardware

½” Cross Clamp

$16.00

½” Cross Clamp

½” Cross Clamp – Allows for ” X ” bracing of (2) – 1/2″ pipes (pipe not included)


10″ Galvanized Iron Cleat


14″ Galvanized Iron Cleat


$17.95

2.0″ Pipe Adjustable Brace Assembly

2″ Pipe Adjustable Brace Assembly – Used for diagonal bracing between two dock legs.  Brace using 1/2″ pipe.


$18.50

2.0″ Pipe Adjustable Brace Split Assembly

2″ Pipe Adjustable Brace Assembly – Used for diagonal bracing between two dock legs.  Brace using 1/2″ pipe.  Split assembly allows for mounting after the dock is mounted.


Stationary Hardware

2.0″ Pipe Point

$23.50

2.0″ Pipe Point

2″ Pipe Point – Typically used with 2″ pipe.  Attaches to end of pipe to aid in the driving pipe deeper into mud or sand to aid in holding your dock in place.


3″ Pipe Holder On 5″ X 5″ Backer Plate

3″ Pipe Holder (0n 5″ X 5″ Backer Plate)

The Pipe that is mounted on the plate has inside diameter of 3″ and an outside diameter of 3.5″.


3″ Pipe Holder On 5″ X 6.75″ Backer Plate

3″ Pipe Holder (0n 5″ X 6.75″ Backer Plate)

The Pipe that is mounted on the plate has inside diameter of 3″ and an outside diameter of 3.5″.


4″ Galvanized Pipe Holder 0n 5″ X 6.75″ Backer Plate

4″ Galvanized Pipe Holder (0n 5″ X 6.75″ Backer Plate)

The Pipe that is mounted on the plate has inside diameter of 4″ and an outside diameter of 4.5″.  Bolt holes are 9/16″ square to take 1/2″ Carriage Bolts.


Angle – Stainless Steel

Our high quality marine hardware is manufactured using 1/4″ stainless steel to prevent rust and weather damage in even the harshest of conditions. Compare our product to our competition and you will see why our parts are the best in the industry.

 


Hardware

Backer Plate

$3.00

Backer Plate

1/4″ Thick Galvanized Steel Backer Plate

——————————————————————————–

5″ x 5″

Backs up DH TM, DH TF, DH CR, DH PH HO3, and any other 5″ x 5″ part.

Fastens with 1/2″ Carriage Bolts.

 


Our high quality marine hardware is manufactured using rolled 1/4″ steel and is hot dipped galvanized to prevent rust and weather damage in even the harshest of conditions. Compare our product to our competition and you will see why our parts are the best in the industry.


Our high quality marine hardware is manufactured using rolled 1/4″ steel and is hot dipped galvanized to prevent rust and weather damage in even the harshest of conditions. Compare our product to our competition and you will see why our parts are the best in the industry.


Our high quality marine hardware is manufactured using rolled 1/4″ steel and is hot dipped galvanized to prevent rust and weather damage in even the harshest of conditions. Compare our product to our competition and you will see why our parts are the best in the industry.


Our high quality marine hardware is manufactured using rolled 1/4″ steel and is hot dipped galvanized to prevent rust and weather damage in even the harshest of conditions. Compare our product to our competition and you will see why our parts are the best in the industry.


$9.80

This premium quality marine hardware is manufactured using  1/4″ stainless steel.  Made to prevent rust and weather damage in even the harshest of conditions. Upgrading is a breeze since we manufacture these with the same dimensions as our galvanized line of 1/4″ hardware.  Compare our product to our competition and you will see why our parts are the best in the industry.


Our high quality marine hardware is manufactured using rolled 1/4″ steel and is hot dipped galvanized to prevent rust and weather damage in even the harshest of conditions. Compare our product to our competition and you will see why our parts are the best in the industry.


Our high quality marine hardware is manufactured using rolled 1/4″ steel and is hot dipped galvanized to prevent rust and weather damage in even the harshest of conditions. Compare our product to our competition and you will see why our parts are the best in the industry.