- Page 7 of 8 - Dock Hardware

Showcase

Outside Corner Male DH SSM Stainless Steel

$67.00

Outside Corner Male – Stainless Steel

Our high quality marine hardware is manufactured using 1/4″ stainless steel to prevent rust and weather damage in even the harshest of conditions. Compare our product to our competition and you will see why our parts are the best in the industry.

Quick View

Dock Accessories

Pile Caps – Black Cone

$16.00 – $80.00

Our piling caps will extend the life of your pilings by preventing water from seeping into the exposed end grain. Eleven different sizes available.

Quick View

Dock Accessories

Pile Caps – Black Flat

$19.00 – $75.00

Our piling caps will extend the life of your pilings by preventing water from seeping into the exposed end grain. Eleven different sizes available.

Quick View

Dock Accessories

Pile Caps – White Cone

$16.00 – $80.00

Our piling caps will extend the life of your pilings by preventing water from seeping into the exposed end grain. Eleven different sizes available.

Quick View

Dock Accessories

Pile Caps – White Flat

$19.00 – $80.00

Our piling caps will extend the life of your pilings by preventing water from seeping into the exposed end grain. Eleven different sizes available.

Quick View

Stationary Hardware

Pipe Adjustable Brace Assembly – 1.5″ – DH PABA1.5 – Cross Brace

$57.95

This 1.5″ adjustable brace is usually used for new builds or docks that come in and out each year. (The DH PABA1.5-S usually works better for existing docks.) It is manufactured using cast aluminum so it is built to last. Using this for diagonal bracing will help stabilize your dock.

Quick View

Stationary Hardware

Pipe Adjustable Brace Assembly – 2.0″ – DH PABA2.0 – Cross Brace

$64.95

This 2″ adjustable brace is usually used for new builds or docks that come in and out each year. (The DH PABA2.0-S usually works better for existing docks.) It is manufactured using cast aluminum so it is built to last. Using this for diagonal bracing will help stabilize your dock.

Quick View

Stationary Hardware

Pipe Adjustable Split Brace Assembly – 1.5″ – DH PABA1.5-S – Cross Brace

$67.95

This 1.5″ adjustable brace split assembly can be used on a variety of docks. It is manufactured using cast aluminum so it is built to last. Using this for diagonal bracing will help stabilize your dock.

Quick View

Stationary Hardware

Pipe Adjustable Split Brace Assembly – 2.0″ – DH PABA2.0-S – Cross Brace

$74.95

This 2.0″ adjustable brace split assembly can be used on a variety of docks. It is manufactured using cast aluminum so it is built to last. Using this for diagonal bracing will help stabilize your dock.

Quick View

Out of stock

Stationary Hardware

Pipe Auger – 1.5″ – DH AUG1.5 – Sand Screw

$69.90

This 1.5″ pipe auger easily attaches to the end of your dock pipe. It’s manufactured using cast aluminum so it’s built to last. Helps stabilize your dock to the seabed. (Drilling through the pipe & pipe point or with 2 set screws is suggested.)

Quick View

Out of stock

Stationary Hardware

Pipe Auger – 2.0″ – DH AUG2.0 – Sand Screw

$73.90

This 2.0″ pipe auger easily attaches to the end of your dock pipe. It’s manufactured using cast aluminum so it’s built to last. Helps stabilize your dock to the seabed. (Drilling through the pipe & pipe point or with 2 set screws is suggested.)

Quick View

Stationary Hardware

Pipe Corner Bracket – 1.5″ – DH PCB1.5

$94.95

The Pipe Corner Brackets are used with 1.5″ ID pipe legs. Bracket can be used if the pipes will be on the inside of the dock or when a section of dock is connected at a 90 degree angle.

Quick View

Out of stock

Stationary Hardware

Pipe Corner Bracket – 2.0″ – DH PCB2.0

$99.95

The Pipe Corner Brackets are used with 2″ ID pipe legs. Bracket can be used if the pipes will be on the inside of the dock or when a section of dock is connected at a 90 degree angle.

Quick View

Stationary Hardware

Pipe Point – 1.5″ – DH PP1.5

$64.95

This 1.5″ pipe point easily attaches to the end of your dock pipe. It’s manufactured using cast aluminum so it’s built to last. Helps stabilize your dock to the seabed. (Drilling through the pipe & pipe point or with 2 set screws is suggested.

Quick View

Stationary Hardware

Pipe Point – 2.0″ – DH PP2.0

$69.95

This 2.0″ pipe point easily attaches to the end of your dock pipe. It’s manufactured using cast aluminum so it’s built to last. Helps stabilize your dock to the seabed. (Drilling through the pipe & pipe point or with 2 set screws is suggested.